Rewmar MS Polymer Wood Flooring Adhesive

Rewmar MS Polymer Wood Flooring Adhesive - ready to use, one component flexible adhesive suitable for bonding all types of wooden flooring to sound concrete floors, latex smoothing underlayments and timber floors

Available in a 15kg tub only

Typical uses are for bonding unfinished/prefinished solid hardwood strip and plank, parquet woodblock, mosaic panels and engineered hardwood floors

• Easy to apply with trowel
• Quick grab (open time approx. 20-30min)
• Good coverage (approx. 1kg/m2) with 6mm notched trowel
• Easy to clean during and after use
• Moisture curing with high final bond strength
• Permanently flexible
• Solvent & Water Free
• Rapid build up of bond strength

Applying Rewmar MS Polymer Adhesive:-

Apply the adhesive with a notched trowel (3mm for mosaic panels, 15mm herringbone - 6mm notch for engineered and solid plank)

Only spread adhesive that can be covered within 20 minutes

Ensure the adhesive is fully in contact with the flooring

Leave at least 12 hours before sanding and finishing the hardwood flooring

Uncured MS Polymer adhesive can be removed with Rewmar Tool Wipes

Notes

Never install to damp substrates 

Do not apply adhesive at temperatures below 5° or above 25° C

Do not install if walls and ceilings are not dry (after plastering or painting)

Old adhesive residues should be mechanically removed