Bona R848T Wood Flooring Adhesive 6kg

Bona R848T  - Single part Silane based flexible wood flooring adhesive in a handy 6kg foil bag

A hard-elastic 1-component Silane based adhesive suitable for the installation of engineered hardwood flooring, parquet mosaics, woodblock and pre-finished or unfinished solid strip and plank upto 150mm wide

• 1-component, easy to use
• Excellent initial grab
• Rapid shear strength development, ready for furniture and foot traffic after 1 day
• Water and solvent free – hardens by chemical reaction with moisture
• Good adhesion to most substrates
• Easy to clean – splashed adhesive can easily be removed
• Improved rib stability – retains trowel notch

Suitable Sub-Floors

Cementitious screed – according to EN 13813

Levelling compounds (minimum 2mm thick, resistant against plasticizer migration)

Calcium Sulfate Screed – according to EN 13813

Chipboard V100, Plywood, OSB

Other dry and sound sub-floors

Preparation

Substrate must in general be even, dry, clean free from cracks and physically sound

The surface should be slightly textured to aid adhesion

A primer is typically not required

Application

The adhesive should be applied evenly using a notched trowel

Flooring should be laid into the wet adhesive and pressed down firmly during the open time (approx. 30 minutes)

Foil bag can be tied with string or cable tie to keep adhesive fresh

Bona R848T Adhesive Coverage:-

3mm notched trowel – installation of Parquet Mosaics – approx. 900g/m2 (6-7m2 / 6kg foil bag)

5mm notched trowel – Engineered, Parquet Woodblocks, Solid Wood Planks – approx. 1200g/m2 (5m2 / 6kg foil bag)

Note: adhesive consumption will be higher on uneven or course surfaces