Oak Toscana Engineered Parquet

A Natural grade Stained Oak parquet floor, Herringbone, Brickbond or Random Strip design

Based on 0 reviews. - Write a review

£58.00 /m2
£152.53 / pack

Ex Tax: £127.11

Qty

Add to Cart

Question Sample

Oak Toscana - Natural grade Stained Oak Parquet engineered floor with some colour / grain variation, occasional small knot and sapwood

Can be installed in Parquet Herringbone, Brickbond, Diagonal or Random Strip Design

Multi-layer spruce core material with 3.5mm Oak top-layer and square edges

Matt Lacquer Finish - 6 coats hardwearing floor lacquer

10 x 70 x 470mm board - 80 panels per pack = 2.63m2 (full packs only)

Tongue and Groove joint system - each pack contains 50% left hand and 50% right hand strips

Install fully bonded to subfloor with MS Polymer adhesive

Recommended for use with underfloor heating systems

Oak Toscana Parquet 10153314 (ETP2356D)

	Use doormats both inside and outside the house to prevent gravel and grit
	Apply felt pads / castor cups to furniture to avoid scratches
	Clean regularly with dry dust mop (Bona floor mops and Microfibre dusting pad are ideal)
	Clean the floor with Osmo Wash and Care (dilute into a spray bottle) with Bona floor mop and Cleaning pad Never use excess water when cleaning your floor
	Boen natural oil finish floors should be maintained with Osmo Liquid Wax Cleaner
	To restore finish to a lacquer finish floor - a wood floor refresher can be applied